CABLEMASTER 600 TESTER

The CableMaster 600 is a cable tester for network, telephone, coax cabling as well as determining the cable length and distance to the fault. Equipped with a RJ45 jack for network cables and a F-connector for coax cables. CableMaster 600 verifies the wire map, determines the cable length and distance to fault. The results can be saved and documented using the PC-based reporting software. CableMaster 600 offers many functions for troubleshooting such as cable tracing, link detection up o 1Gb/s, PoE tests and port/outlet identification with ID remotes. CableMaster 600 is perfectly suited for professional installers and network operators who are challenged with testing both network (RJ45) and coax cabling, verifying the correct wiring, determining cable lengths and documenting all this in test reports.

The CableMaster 600 features an integrated tone generator to send a modulated audible signal into the cable. The tone can be detected by an optional one probe used for cable tracing (unscreened unlabeled cables) and outlet/port identification. Cable ID remotes enable the user to identify which outlet is connected to the appropriate port in a patch panel.

Download specification sheet
  • Tests network and coaxial cables (RJ45 jack and F connector)
  • Displays wire map in graphical format for rapid troubleshooting
  • Determines cable length and distance to the cable fault performing a full TDR measurement
  • High resolution colour display for excellent readability in any environment
  • Generation of test reports and documentation with PC-based reporting software
  • Extensive test and fault finding capabilities such as: Cable tracing/port identification using a one probe, PoE detection and testing, Link test up to 1 Gb/s, outlet/port identification with ID remotes
Parameters Specifications
Measurement Technology Time Domain Reflecometry (TDR)
Cable Measurements Cable Testing and ID: up to 1,000 ft (305 m
Split Pair Detection: 3 ft (1 m) to 1,000 ft (305 m
Length Measurement: 0 to 1,500 ft (457 m), ± (5%+1 ft)
Supports 8 continuity and ID numbers remotes (RJ 45)
Supports 20 RJ 45 and 20 F connector ID only remotes
Power over Ethernet Tests for IEEE 802.3af and IEEE 802.3at (PoE Plus) compliant PoE
Tests for classes and loads cable up to 25.5 watts
(at class 4 Identifies Mode A or B (pairs with PoE)
Active Ethernet Indicates advertised speeds of 10/100/1000 base-t half or full duplex
Can Link to network at 10/100 base-t
Maximum Voltage Parameters refer to the maximum voltage that can be applied to
any 2 connector pins without causing damage to the tester.
– RJ Jack: 66 Vdc or 55 Vac
– F-connector: 50 Vdc or Vac
 Save Test Results Stores up to 250 cable or network tests with user defined names
Tone Generation Tone Frequencies: 730 Hz and 1440 Hz
Languages English, French, German, Spanish
Battery Life For 6xAA, 9VDC, 2,200 mA-hr (typical) alkaline battery:
Operating – 20 hous typical
Standby – 1.5 years typical
(200 uA max standby current)
Batteries are included
Altitude 10.000 ft (3048 m) operating
Temperature Operating: 32 o 122°F (0 to 50°C) Storage: -22 to 140°F (-30 to 60°C)
Humidity 10 to 90% non-condensing
Enclosure High-strength PC/ABS plastic with VO rating with boot
Withstands 4 foot drop onto concrete
Size 1.85″H x 3.6″W x 6.8″L (4.7 x 9.15 x 17.3 cm)
Weight With batteries: 1 lb 2 oz (510 g)
Safety Compliances CE

 

Cablemaster 600 Cablemaster 650
600-kit 650-kit
Professional cable tester includes:
1 network/tel testing and ID remote
6xAA batteries
2 RJ45 cables
micro USB cable
pouch
Professional cable tester includes:
1 CableTracker CT15 tone probe
8 network/tel testing and ID remotes
1 cable assembly RJ45 to alligator clips, 1-20
coax ID remotes
6xAA batteries
9 RJ45 cables
micro USB cable