WIREXPERT 500

The WireXpert 500 is the most affordable tester for copper LAN cabling certification.

It is increasingly common today for electrical contractors to get projects for installing network cabling systems. WireXpert 500 allows you to maximize the value you can provide to your customers, without adding complexity or heavy cost. Your technicians can certify copper cabling systems from CAT5e to CAT6A (Class D to Class EA) easily with WireXpert 500, allowing you to produce professional test reports for your customer.

Owners of network systems in SOHO and medium enterprises increasingly demand fully tested installations. While technicians with good training and skills can handle the installations affectively, the challenge is to perform testing of these cables efficiently and with minimum cost. WireXpert 500  is specifically designed for installers of copper network cabling systems. It can test shielded and unshielded cables to industry standard requirements.

Note: Please consider the most advanced cable tester WireXpert 4500 if you see a need to perform installation testing on CAT8/40G cables, Class F/Class FA cables, or fibre and MPO cables.

Download specification sheet
  • Advanced cable certification up to 500 MHz
  • Certifying according to standards Class D/E/EA & CAT 5e/6/6A
  • Extremely short autotest time bei CT6A and Class EA
  • Meets TIA and ISO Level IIIe accuracy requirements
  • Certification testing of Patchcords via dedicated adapters
  • Industrial Ethernet testing via purpose-built M12 adapters
  • Advanced reporting and documentation
Item Specification
 COPPER TESTING
Certification testing TIA 568-C.2 CAT 5e, 6, 6A
ISO/IEC 11801, EN 50173 Class D,E,EA
CAT 5e, 6, and 6A patch cord
 Max cable length for dual ended Autotest 500m
 Insertion Cycles Channel: 10,000 typical
Permanent link: 5,000 typical
 Test Parameters As specified in TIA 1152, IC 61935-1
 Loop Resistance  0 to 40 Ω, ±0.1 Ω
 Length  0 to 500m, ±0.5m (dual ended testing)
 Propagation Delay and Delay Skew  0 to 5000 ns, ±1 ns
 Attenuation  0 to 70 dB, ±0.1dB
 Pair-to-Pair and Power-Sum NEXT  0 to 85 dB, ±0.2 dB
 Pair-to-Pair and Power-Sum ACRF  0 to 85 dB, ±0.2 dB
 Return Loss  0 to 40 dB, ±0.2 dB
 ACRN, PSACRN  -25 to 85 dB, ±0.5 dB
 Advanced Diagnostics  Time-domain fault Locator for RL and NEXT
 Measurement Accuracy  exceeds TIA 1152 & IEC61935-1 level IIIe
 Measurement Frequency Range  1- 500 MHz
 GENERAL SPECIFICATIONS
 Interfaces  Probe Interface, RJ-45 Ethernet, USB host and device,
talkset, power jack
 Display  6“ industrial LCD, touch sensitive area on both units
 Enclosure  Ruggedised plastic with rubber overmould,
withstands 1.5m drop test on hard surface
 Remote unit abilities  View test results, save tests, start autotest
 Power Supply  AC 100-240V to 12V, 3A power adapter
 Input over-voltage protection  Protected against Telco voltages
 Battery  Removable and rechargeable Li-Ion
 Battery Capacity  >8 hours continuous operation
 Internal Storage Capacity  2000 copper test results with full plot information
 External Storage  USB Flash Drive
 Dimensions  232 X 126 X 87 mm (9.1 X 5.0 X 3.4 inch)
 Weight  Approx. 1.4 kg (3.0 lb) / unit
 Supported Languages  Chinese, Czech, English, Finnish, French, German, Italian, Japanese,
Korean, Polish, Portuguese, Russian, Spanish, Swedish, Turkish
 Calibration period  1 year
 ENVIRONMENTAL
 Operating Temperature  0 to 40°C
 Storage Temperature  -20 to 60°C
 Relative humidity  10% to 80%

Copper Patch Cord Testing
WireXpert 500 offers an efficient way to quickly identify and record the performance of patch cords. With its fast and accurate dual-ended testing, WireXpert 500 patch cord test kits are suitable for both manufacturing test applications, as well as for incoming inventory inspection at end user premises. WireXpert 500 patch cord test kits are available for testing CT5e, CAT6, and CAT6A patch cords.

Industrial Ethernet Cabling Test
The WireXpert 500 industrial Ethernet cable test solution comprises of M12 adapter kits with both channel and permanent link configurations using M12 industrial Ethernet connectors are supported.

Coax Cable Test
WireXpert 500 also supports testing of coaxial cables for attenuation and return loss with the optional coax test adapters.

Professional Data Management with eXport Software
WireXpert 500 includes eXport computer-based reporting software. eXport facilitates data management and generation of professional reports and warranty documents. In addition, eXport Software enables list-based testing, a hierarchical cable labelling scheme. With eXport it’s also possible to correct measurements which were initially performed with incorrect measurement standards. With re-certification, the operator can apply the right measurement standards to the data retroactively. Data integrity remains because the date of the measurements does not change.

KIT INCLUDES:
 wirexpert500-kit
 WireXpert 500 LAN Copper Cable Certifier Class D, E, EA and CAT5, 6, 6A
Includes two measurement units:
Local and remote,
2 x CAT 6A channel adapters,
2 x CAT 6A link adapters,
2 x headsets,
Li-Ion bateries, power supplies, USB drive,
Soft carry case,
Calibration certificate and reporting software